| Title |
Publisher |
Price |
This is the 2nd set of requested tiles my friend Lou asked me to try and make for him for to go with to Tower of Terror set. Included a small and large balcony, small bump out, potty and support walls that can go under the balconies and bump out.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened... [click here for more] |
Fat Dragon Games |
$3.99
|
Large 3 Story Inn with repeatable 3rd story
Walls cut at and unstack at 1/3 hieght for optimal tabletop gaming
Peg stacking system, pegs inserted seperately for stronger printing and easy repair
Kitchen, tavern area, and 3 room floor
Requires 8 inch print bed
Expansion set coming out soon for more hieght and variety
Details
Our STL Models are all HIGHLY detailed and will continue to be relevant... [click here for more] |
GameScape3D |
$20.00 $5.00
|
I am so excited to offer this set! I got sick of having loose scatter on a battle mat and so decided to make an FDG community forest tile set. All tiles are 4x4 anddesigned in a way that preserves the grid without adding obnoxious lines. This set comes with many unique tiles. Printing just 1 of each tile provides over 3 and half square feet of play. When combine the other Woodland and Riverside sets,... [click here for more] |
Fat Dragon Games |
$19.99
|
THis 3D Printable Primitive style furnature for resin printing
Features
30 pieces of furnature
Chitubox Support files Included
10 with merged supports (the most complex parts)
Bedroom, Kitchen, and Bar room Furnature
... [click here for more] |
GameScape3D |
$12.00 $5.00
|
Full Set of Badland Round bases. Honey Comb bottom and pry lip design allows for FLAT resin printing or FDM printing, no support needed for either! honeycomb set up to fit 1x5mm magnet rounds.
Sizes include
ROUNDS
3_25mm
3_32mm
3_40mm
50mm
60mm
80mm
100mm
130mm
160mm
OVALS 60x35mm
75x46mm
90x52mm
105x70mm
170x105mm
120mmx92mm
PILL 25x70mm
... [click here for more] |
GameScape3D |
$3.00
|
Full Set of Badland SQUARE bases (Kings of War). Honey Comb bottom and pry lip design allows for FLAT resin printing or FDM printing, no support needed for either! honeycomb set up to fit 1x5mm magnet rounds.
6_25mm 6_20mm 4_25mmx50mm 3_40mm 3_50mm 2_50mmx75mm 2_50mmx100mm ... [click here for more] |
GameScape3D |
$3.00
|
17 Pieces of scatter furniture intended for resin printing. Chitubox samples supports included ... [click here for more] |
GameScape3D |
$3.00
|
Expansion for this Building (Not a stand-alone product)
https://www.drivethrurpg.com/product/348347/Inn
Tower expansion and 2 new floor designs for our Inn
Requires 8 inch build plate.
... [click here for more] |
GameScape3D |
$4.00
|
Light up column with 2x2 dragonlock campatable base and one without a base. Done in the Realm of the Mountain King style from Fat Dragon Games.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5%... [click here for more] |
Fat Dragon Games |
$1.00
|
I am really excited to share these LED Dungeon tiles. This is a first set of many to come. If you are familiar with the original FDG LED Torch Wall, then these will be a no brainer to assemble. This set includes a variety of tiles including an angled torch wall, scrying pool and a variety of braziers. Check out the previews!
... [click here for more] |
Fat Dragon Games |
$14.99
|
I am excited to add this Tower of Terror Treasure Set to the treasure set collection. This set includes 16 variations to each of the floor types (Wood, Castle, and Dungeon), plus a treasure version of the trap door floor, stairway floor, four ruined floor pieces, and three scatter treasure piles. ***NOTE: This set requires the FDG Tower of Terror set to full function, as this treasure set is a community... [click here for more] |
Fat Dragon Games |
$9.99
|
A remix of the throne from Realm of The Mountain King as a secret door
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum
Top/Bottom Layers: 8 Top/ 4 Bottom
Shell... [click here for more] |
Fat Dragon Games |
$1.99
|
An expansion set for the posts of village buildings 1 and 2 with some pillars included this set contains wooden and stone Double posts in many different combinations as well as a Pillar for both wood and stone.
This set contains 20 variations of posts and pillars
This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$2.50
|
This set includes an angled dungeon door base separate wall piece, two offset dungeon door base separate wall pieces and a custom dungeon lintal to fit these doors.
* This set does not include a door or the hinge to attach it to the bases, you will need to have purchased the Fat Dragon Games FDG0204 Dungeon Separate Wall set for these pieces. ... [click here for more] |
Fat Dragon Games |
$2.50
|
Set of spiral stairs done in the style of Realm of the Mountain King set from Fat Dragon Games.
4 2x2 stairs and 1 set of stackable stairs
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum... [click here for more] |
Fat Dragon Games |
$2.99
|
This is an add-on set for the Fat Dragon Games Ultimate Tavern set. https://www.drivethrurpg.com/product/254564/DRAGONLOCK-Ultimate-Tavern-Walls-Classic-Tile?
Included in this set are freestanding straight and 45 degree angle pieces as well ones placed up against tavern wall pieces.
Clips to connect the pieces together can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346... [click here for more] |
Fat Dragon Games |
$4.99
|
This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways.
The center of the bridge prints in two parts, and you should glue the two parts together.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% for all models recommended,... [click here for more] |
Aether Studios |
$4.79
|
I am excited to offer this new set, which includes a large cavern column with LED crystals and LED Fungus tiles! Additionally, I included a 4x4 tile with multiple LED inserts so the crystals can vary in color as an option.
Enjoy!
... [click here for more] |
Fat Dragon Games |
$14.99
|
This Is a expansion to the existing line, adding supports/bracings in 3 different lengths. This Set works great with the Balconies/Porches set. Many of the posts were test printed, they do not require support to print. There is a load of combinations already made in the set but not every possible combination,which is why i included the supports alone. If there is one that is not in the set and... [click here for more] |
Fat Dragon Games |
$4.00
|
One of my favorite spells is continual light and I am excited to have this as a feature of these new tiles. Going with the theme of the Hand Mage, this set also includes a torch variation as well as brazier and scrying pool.
... [click here for more] |
Fat Dragon Games |
$14.99
|
3 Story Timber Frame House. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 1
Stairs
3 Story Townhouse
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$4.00
|
1 Story Timber Shack House and Dock with basement. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 8
1 Story with Basement
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Some Gluing Required
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control),... [click here for more] |
GameScape3D |
$4.00
|
This expansion includes LED tiles to compliment the existing Necromancer Lair set. Additionally, a special 4x4 dais with two new insertables (Hand Mage scrying pool and brazier) and other variations.
... [click here for more] |
Fat Dragon Games |
$14.99
|
1 Floor Shack with Stone Tower. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 5
Stone Tower
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL... [click here for more] |
GameScape3D |
$4.00
|
2 Story Goblin Watch Post. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Goblin Watch Post
Stairs
2 Story
Support Free Printing
Basement Storage Area
8X8 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL Models are all HIGHLY detailed... [click here for more] |
GameScape3D |
$3.00
|
Set of 20 Simple scatter terrain ruins. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Ruins Pack I
10 Floor sets
2 Building Corner Ruin Sets
2 Building T Ruin Sets
8 Straight Wall Ruins
Support Free Printing
90% can fit on Small Resin Printer
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura,... [click here for more] |
GameScape3D |
$10.00
|
This is a set of castle floor pieces using the floor texture from the base of the FDG Tower of Terror set. This set includes two 1x2 floor tiles, a 2x2 floor tile, a 2x4 floor tile, a 4x4 floor tile and two 45 degree angle pieces.
Dragonbite clips can be found here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30 ... [click here for more] |
Fat Dragon Games |
$2.99
|
2 Story Timber Frame House. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 6
Stairs
2 Story Townhouse
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$4.00
|
Swamp Outpost and Dock. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Swamp Outpost & Dock
2 Story
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$4.00
|
The Canals, Rivers, and Bridges set.
The set contains 37 stl. files. 36 of which are terrain tiles and 1 a small boat, There are 2 different styles of bridges both of which can be expanded to whatever length needed using the extended walkways i release as part of another pack, the extendedwalkways are included here. The river tiles also have some added details such as a small dock... [click here for more] |
Fat Dragon Games |
$16.00
|
Set of 6 scatter terrain ruins. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Ruins Pack II
3 Floor Rubble sets
3 Building Ruin Sets
Uses Open_Peg Stacking System
Support Free Printing
8X8 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$8.00
|
2 Sotry Shack. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 2
2 Story
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL Models are all HIGHLY... [click here for more] |
GameScape3D |
$4.00
|
3 Story Schack with 3rd Floor Porch. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 3
3 Story
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL... [click here for more] |
GameScape3D |
$4.00
|
Large Stone Peasant house with wood second story and thatch. ALso includes 6 1 story shacks with thatch roof. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Large Peasant House and 6 Shacks
10 inch long interior space
includes fence for animal pen
New that design
Full Diagram
Doors Function
8 inch Print Bed Required
Also includes 6 small basic shacks
Pieces are... [click here for more] |
GameScape3D |
$18.00
|
Large Ruin that can convert to a bandit hideout.. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Ruin/ Bandit Hideout
7x12 inch footprint
Can convert from ruin to Hideout
Mirror parts to mix and match towers
Walls stack from 1/3 Height for easy gameplay
Diagram Included
Designed for 8 inch build plate
Support Free Prints
Pieces are designed to print on 8×8 beds. Models... [click here for more] |
GameScape3D |
$14.00
|
Tree Watch Post for elves or rangers. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Tree Watch Post
Simple Build
Uses Open [] Peg Stacking System
8x8 Build Plate but 12 inch better
Support free printing/no glue assembly
Full Diagram
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.... [click here for more] |
GameScape3D |
$4.00
|
3 Story Timber Frame House. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 7
Stairs
3 Story Townhouse
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$4.00
|
2 Story Timber Shack House. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 8
2 Story
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL Models... [click here for more] |
GameScape3D |
$4.00
|
Set of 6 scatter terrain ruins. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Goblin Swamp Fort
Goblin Swamp Fort and Ruins
3 Levels
15x15 inch footprint
6 inches tall to timber wall
3 Crow's Nest Options
Optional Bottom Stairs
Diagram Included
Designed for 8 inch build plate
Support Free Prints
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED... [click here for more] |
GameScape3D |
$16.00
|
This Lowland Road system can be a stand alone item or tie into one of our Other road systems. This is a OpenLOCK Infinite Road System from GameScape3D’s “Road To Adventure” series. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
OpenLOCK Connectors
Designed for 8 inch build plates
Support Free Printing
22 Road Parts
8 Scatter Terrain Models
4" Wide with 2"+ of road area
1... [click here for more] |
GameScape3D |
$15.00
|
Complete bi-level trail and hi-way swamp system with. OpenLOCK connectors. AN Infinite Road System from GameScape3D’s “Road To Adventure” series. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
OpenLOCK Connectors
Designed for 8 inch build plates
Support Free Printing
2 Height Options
7 Trail Designs
4"+ Wide Hi-way (Spikes Optional)
1 Y trail section
1 X Hi-Way Section
3... [click here for more] |
GameScape3D |
$18.00
|
Sometimes less is more. Simple Style OPenLOCK Infinite Road System from GameScape3D’s “Road To Adventure” series. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
OpenLOCK Connectors
Designed for 8 inch build plates
Support Free Printing
14 Road Parts
1 T section
1 Y section
1 X Section
1 ramp,
1 1” Slope Booster
1 Trail Connector
4 Curves
4 Straights
Includes... [click here for more] |
GameScape3D |
$15.00
|
This is just something I made while learning sculpting tools, I plan to release more random things I make as i make and refine them, you guys can just have fun with them. update: added "Alien Saucer" this only contains a single STL currently released The haunted painting can be printed but must be on the high detail settings and have your printer dialed in: note the fingers, horns and teeth tend... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This Highland Road system can be a stand alone item or tie into one of our Other road systems. This is a OPenLOCK Infinite Road System from GameScape3D’s “Road To Adventure” series. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
OpenLOCK Connectors
Designed for 8 inch build plates
Support Free Printing
15 Road Parts
8 Scatter Terrain Models
4" Wide with 2"+ of road area
1... [click here for more] |
GameScape3D |
$14.00
|
War for Chicken Island: Cluckthulhu and Yolk-Sothoth STL files
These are the files for the Cluckthulhu and Yolk-Sothoth STL files that were available as add-on scenarios for the campaign. They need to be printed with supports on.
Share your pictures with us on Facebook (@DracoStudios) or Instagram (@Draco_Studios)... [click here for more] |
Draco studios |
$8.00
|
3 Story Timber Frame House. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Large House 1
Stairs
4 Story Townhouse
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
8X8 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$12.00
|
Road for Dead Land, Bad Land, Lava Land settings. SimOPenLOCK Infinite Road System from GameScape3D’s “Road To Adventure” series. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
OpenLOCK Connectors
Designed for 8 inch build plates
Support Free Printing
20 Road Parts + Scatter
1 T section
1 Y section
1 X Section
1 ramp
2 Special Sections (Earth Quake, Narrow)
6 Scatter... [click here for more] |
GameScape3D |
$16.00
|
This trail system can be a stand alone item or tie into one of our road systems. This is a OPenLOCK Infinite Trail System from GameScape3D’s “Road To Adventure” series. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
OpenLOCK Connectors
Designed for 8 inch build plates
Support Free Printing
9 Parts
2" Wide with 1"+ of trail area
1 T section
1 ramp
1 1” Slope Booster
2... [click here for more] |
GameScape3D |
$5.00
|
3 or 4 story siege tower with ballista nest. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
3D Printable Siege Tower
Nearly 12 Inches Tall
4 or 3 stories
Ballista Nest on top
mostly Support free printing
Working Drawbridge
6X6 Bed Advised
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.... [click here for more] |
GameScape3D |
$7.00
|
Gnomish Airships contains three 3D-printable STL airships for the serious Gnomish tinkerer. Each airship has accessory mounts, and a number of different accessories are included so you can customize each ship (cannons, turbines, etc. -- the cover rendering shows several assembled options). Never let your inventors be ground-bound again!
Note: the Gnomish Workshop set is recommended to complement... [click here for more] |
Aether Studios |
$7.19
|
Log In 
