Title |
Publisher |
Price |
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create a multi level building with signs, facade decor as well as pieces of scatter terrain
Floors are stackable and signs can be placed along vertical tracks or on the buidling sides.
Base dimensions are 89mm x 72mm
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
1 Story Timber Shack House and Dock with basement. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 8
1 Story with Basement
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Some Gluing Required
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control),... [click here for more] |
GameScape3D |
$4.00
|
Set of 20 Simple scatter terrain ruins. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Ruins Pack I
10 Floor sets
2 Building Corner Ruin Sets
2 Building T Ruin Sets
8 Straight Wall Ruins
Support Free Printing
90% can fit on Small Resin Printer
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura,... [click here for more] |
GameScape3D |
$10.00
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$15.00
|
Primordial Ooze (3D Print STL File) A disgusting amoeboid monster to satisfy all your needs for slimes, jellies, oozes, and sludges. Perfect for fantasy, post apocalypse, sci-fi, weird fiction, or any other setting that would call for such a creature. The preset dimensions for the primordial ooze are 32x45x7mm. Naturally you will want to resize this if needed to fit the monster dimensions... [click here for more] |
Fishwife Games |
$0.55
|
Here you will find all of the models released via our Patreon in July 2023. Patreon members can get all of our monthly releases at a discounted rate. If you like this set please check out our Patreon here https://www.patreon.com/user?u=89784988
nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities.... [click here for more] |
nonPareil |
$5.00
|
This is just something I made while learning sculpting tools, I plan to release more random things I make as i make and refine them, you guys can just have fun with them. update: added "Alien Saucer" this only contains a single STL currently released The haunted painting can be printed but must be on the high detail settings and have your printer dialed in: note the fingers, horns and teeth tend... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Cheese Maker 15 parts (All Resin with CHitubox support Files)
We have a couple of cheese presses (2 versions of each) and a couple other things that go with that. Cheese has to age at least 3 months so we have a shelf for it, cheese blocks, and a couple tables. We have a press bucket with curded milk and empty, that is ready for press. We have a bucket with milk and stir spoons and another bucket... [click here for more] |
GameScape3D |
$6.00
|
Evolved through terrible dark magic beyond the need for its undead body, the Demi-Lich will make a formidable opponent for any band of adventurers. With gems set in its eye-sockets and precious gems in place of teeth it is a horrific image, quite possibly the last to be seen by those that disturb it.
If you like our Demi-Lich, be sure to take a look at our Lich Necromancer here... https://www.drivethrurpg.com/product/389545/Lich--Undead-Sorcerer--Necromancer... [click here for more] |
nonPareil |
$0.50
|
Included in this set of 3d printable scatter terrain you will find 44 . STL 3d printable files. These stepping stones add new expansion opportunities to your swamps. This set has both scatter and tile options. Both brackish tiles and dockyards water tiles are available.
TERRAIN Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill:... [click here for more] |
Aether Studios |
$5.00
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series. These signs are made to fit the slots and tabs of the other buildings released and are double sided. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
SCI-FI GEAR: POWER CONVERSION STATION (3D Printing STL File)
You can feel your hairs stick up from static discharge as you walk closer to the sprawling piece of machinery. A tech in a faded out jump suit reaches down and presses a few controls while frowning at the feedout on an aging monitor screen. "Power is still just at 50%", the tech explains as he hits a few more buttons,... [click here for more] |
Fishwife Games |
$1.50
|
SCI-FI GEAR: ALIEN CARGO CRATES (3D Printing STL File)
The customs officer scurries out of the ship's hold with a worried look on her face. "Something is leaking!" You carefully enter the cargo hold and are suddenly overwhelmed by strange fumes. Looking down you see a puddle of purplish fluid forming next to an alloy crate. What is that stuff? The alien writing is foreign to you....... [click here for more] |
Fishwife Games |
$1.50
|
2 Story Goblin Watch Post. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
Goblin Watch Post
Stairs
2 Story
Support Free Printing
Basement Storage Area
8X8 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL Models are all HIGHLY detailed... [click here for more] |
GameScape3D |
$3.00
|
Overview:
Harvest Festival will never be the same again, with the Pumpkin Mimic lying in wait... Poor Johnny didn't know what to do when those sharp teeth sliced his hands clean off at the wrists...
"That'll teach him to try and carve a new mouth for ME" thought the mimic...
Contents:
You get 10 files - A plain pumpkin and its Mimic alter ego, on a 50mm base and as... [click here for more] |
LegendGames |
Pay What You Want
|
Full Set of Badland Round bases. Honey Comb bottom and pry lip design allows for FLAT resin printing or FDM printing, no support needed for either! honeycomb set up to fit 1x5mm magnet rounds.
Sizes include
ROUNDS
3_25mm
3_32mm
3_40mm
50mm
60mm
80mm
100mm
130mm
160mm
OVALS 60x35mm
75x46mm
90x52mm
105x70mm
170x105mm
120mmx92mm
PILL 25x70mm
... [click here for more] |
GameScape3D |
$3.00
|
114 doorways with posts on either ends so they can fit on a 2x2 village floors tile, or across a 1 inch village floor between walls. 4 sets in all, 30 pegged posted doorways that fit on a 2x2 tile, and a copy of each with holes instead for magnets. 27 doorways that fit between walls over a 1 inch floor, and copies of each with holes for magnets. 6 timber posts with round pegs for easy placement and... [click here for more] |
Fat Dragon Games |
$7.95
|
RUSTIC TAVERN FURNITURE:
“Hello friends! Make your selves at home… I’ll have a wench over with some starter ale and hot rolls in just a moment...” The bartender calls out to the party and seems friendly enough. The place appears to be well stocked and laid out with wooden furniture that is quite durable but rustic in nature. The thief eyes the bench for possible splinters before sitting... [click here for more] |
HAZARD Studio |
$1.99
|
17 Pieces of scatter furniture intended for resin printing. Chitubox samples supports included ... [click here for more] |
GameScape3D |
$3.00
|
MAD SCIENCE: Compact Fabricator (3D Printing STL File)
So you're getting an adventure ready for a Saturday night session and you need to flesh out the lair for that mad scientist character... What you gonna fill it with?
The Compact Fabricator is another entry in a series of products dedicated to such a miniatures gaming location. Though the mad scientist lair... [click here for more] |
Fishwife Games |
$1.50
|
City of Tarok is a 3D printable medieval and fantasy village set with buildings that were great at their height, but after a huge war, they are just crumbling remains of the gorgeous buildings they once were. The area is still populated, but the inhabitants have fallen on hard times. As people come back, the once-abandoned buildings are getting new life, the mill, blacksmith and mine are working again... [click here for more] |
Black Scrolls Games |
$14.99
|
This are all the files for the complete SET from the Nirmala miniature art - cave rooms ... [click here for more] |
Nirmala Miniature Art |
$50.00
|
1 Floor Shack with Stone Tower. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 5
Stone Tower
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our STL... [click here for more] |
GameScape3D |
$4.00
|
2 Story Timber Frame House. THIS IS A DIGITAL PRODUCT FOR 3DPRINTING
Features
House 6
Stairs
2 Story Townhouse
Uses Open_Peg Stacking System
Full Diagram
Support Free Printing
Doors Function
6X6 Print Bed Required
Pieces are designed to print on 8×8 beds. Models are tested on and GUARANTEED for Sli3r (including Prusa Control), Cura, and makerware/desktop.
Details
Our... [click here for more] |
GameScape3D |
$4.00
|
Loveseat (3D Printing STL File)
A very standard piece of furniture. Perfect for modern, retro-modern, cyberpunk, near future dystopia, post apocalypse, super hero, and other related settings.
Recommended Print Dimensions: 22x42x22mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA.... [click here for more] |
Fishwife Games |
$0.70
|
Office Desk (3D Printing STL File)
A very standard looking office desk for modern, cyberpunk, zombie outbreak, or post apocalypse type settings.
Recommended Print Dimensions: 50x21.5x19mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very... [click here for more] |
Fishwife Games |
$0.60
|
This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series, most especially the Street Debris set. These signs are made to fit the slots and tabs of the other buildings released and are double sided. Also included is a garbage pile model. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
I will Aim this round, here is my marker, remember I can't move. Are you still on Hold? Status Pointers to mark Status Conditions of Wild Cards and Extras for your Savage Worlds games.
You will be getting a 3D STL digital file to print your own models.
Included for this purchase are the following files:
Distracted Pointer
Vulnerable Pointer
Aim Pointer
Defend Pointer
Hold... [click here for more] |
Pinnacle Entertainment |
$2.00
|
Game Tokens: Wound Status STL
This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder
Included with the STL is a readme detailing printer settings to achieve... [click here for more] |
Blessed Machine |
$1.00
|
From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set, Lily Wetlands, was built specifically to blend with our existing published Dockyards titles. It contains 39 2x2 and 4x4 tiles on top of Dragonbite bases. Additional printing advice is available in the included ReadMe.
RECOMMENDED PRINT SETTINGS
● Layer Size:... [click here for more] |
Aether Studios |
$15.00
|
3D printable War Wizard statue/miniature that you can print out at home and use them as a cheaper, but still visually pleasing, alternative on your tabletop.
This model was designed and tested by the two artists of Black Scrolls Games. You can print out these models on your own 3D printer or you can take them to a local library or a shop that offer this kind of... [click here for more] |
Black Scrolls Games |
$5.95
|
Edgar Rice Burroughs’ John Carter of Mars: Adventures on the Dying World of Barsoom transports you to the Red Planet of Barsoom, an arid, dying land of ancient civilizations and fearsome creatures. Begin your adventures of romance and heroism with these exciting miniatures which will bring your roleplaying adventures to life!
This 3D print product features John Carter of Mars, Princess Dejah Thoris,... [click here for more] |
Modiphius |
$11.00
|
Here you will find all of the models released via our Patreon in June 2023. Patreon members can get all of our monthly releases at a discounted rate. If you like this set please check out our Patreon here https://www.patreon.com/user?u=89784988
nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities.... [click here for more] |
nonPareil |
$5.00
|
Merchant Stand with Slide in walls. for resin printing but building part can be FDM printed. Resin support files included.
*** Product includes one shed with 3 interior variations. Product image depicts 2 views of each set up*****
· 3 roof variations each
· Includes Resin and FDM style Roof
· 3 Slide in walls, 3 table top
... [click here for more] |
GameScape3D |
$8.00
|
Merchant Stand with Slide in walls. for resin printing but building part can be FDM printed. Resin support files included
*** Product includes one shed with 3 interior variations. Product image depicts 2 views of each set up*****
· 3 roof variations each
· Includes Resin and FDM style Roof
· 3 Slide in walls
Also includes a shed and empmty merchant... [click here for more] |
GameScape3D |
$7.00
|
The Chasm series is back with a new update! Rickalias Ebborts took the lead on crafting up these very special remixes for the community. Expand your chasms into cavernous canyons with rock bridges or utilizing some of the Natural Bridge options. You can see all the tiles included in this set below. The large tile on the left is used to support a larger base of tiles above it.
Recommended... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this release is the Dwarven Crusher "Big HANS" This mean machine has been engineered as a giant crushing vehicle perfect for arena deathmatches. The model is available as a single print or as two halves that clip together. This model was a reward for patrons of Aether Studios in March 2020.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill:... [click here for more] |
Aether Studios |
$1.00
|
Aztlan 6: Swamped is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we decided to kickstarter it with requests by our many fans and patrons. We've packed this set full of terrain - over 120 models of .STL printable files. To get the full utility of this set, we recommend you have the Aztlan 1 and Aztlan 4 or Aztlan Starter... [click here for more] |
Aether Studios |
$10.00
|
The Future Worlds Scatter Terrain: Ruined Building #1 is the first in a set of ruins and buildings designed to be thrown down onto your wargaming table to provide cover, objectives and points of interest to your wargame of choice. This model will be suitable for most modern or sci-fi wargames and is scaled (as default) for 28mm figures.
This product contains three separate models: a large ruined... [click here for more] |
Arid Hills Gaming |
$3.50
|
Modular Dragon Turtle.
Has multiple heads, nest, and swimming pose alternate set for creating massive dragon turtles to haunt or help your ships and seas.
Thank you for supporting small artists!! These models are for personal non-redistributable use only. For commercial printing options, please contact us directly. ... [click here for more] |
Dragon Workshop |
$8.00 $4.80
|
Professionally designed 3D model.
You get an .STL file for a Chest
Purchase once and print forever!
Print with affordable ABS or PLA plastic.
RECOMMENDED PRINT SETTINGS:
100... [click here for more] |
Rocket Pig Games |
$1.88
|
City of Tarok is a 3D printable medieval and fantasy village set with buildings that were great at their height, but after a huge war, they are just crumbling remains of the gorgeous buildings they once were. The area is still populated, but the inhabitants have fallen on hard times. As people come back, the once-abandoned buildings are getting new life, the mill, blacksmith and mine are working... [click here for more] |
Black Scrolls Games |
$10.00
|
Aztlan 5: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 temple models has increased in size and quality. Aztlan 5: Reforged is now a 59 model set updated with requests. With these models you can build out huge... [click here for more] |
Aether Studios |
$2.00
|
Maze Game Pedestal (STL 3D Printing Model File) The crafty thief peers into the grand ballroom, curious to see what the wealthy occupants within are doing. A trio of young nobles are gathered around an elaborate maze mounted on a stone pedestal. The best dressed (a prince perhaps?) participant laughs gleefully as he picks up a jade figurine and moves it to another hallway on the... [click here for more] |
Fishwife Games |
$2.50
|
SCI-FI GEAR: MINERAL REFINERY (3D Printing STL File)
The rumbling and grinding of the machinery was defeaning. "What the crap is that thing working on!?!" shouts the crew's science officer. Without looking over the chief engineer replies back. "Uranium. We found a bunch of it in that crater. Gonna need it if we hope to get off this rock ball!"
The Mineral Refinery is a sci-fi... [click here for more] |
Fishwife Games |
$1.50
|
SCI-FI GEAR: VAPOR EXTRACTOR (3D Printing STL File)
As you make your way across the arid landscape of the moon's surface you are greeted by mechanical noises... whirs, clicks, and whooshes. A unit near you suddenly kicks on to life with blinking lights and a low rumble. What is that thing? It seems to be sucking in the air around you... is that a tank behind it?
The Vapor Extractor... [click here for more] |
Fishwife Games |
$1.25
|
From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes 8 Hag and Prisoner miniatures from our first kickstarter. The set includes all of the miniatures models shown below and more. All miniatures print without supports. Additional information and resources can be found in the ReadMe.
RECOMMENDED PRINT SETTINGS
● Layer Size: 0.1mm... [click here for more] |
Aether Studios |
$11.00
|
Chest Of Drawers (3d Printing STL File)
This file is a simple, easy to print chest of drawes that is suitable from most settings- from fantasy to modern.
Default dimensions are: 24x13x34mm ... [click here for more] |
Fishwife Games |
$0.55
|
This expansion includes newly mixed Fat Dragon Games models on hex bases to compliment the Hex Dungeon Starter Set.
... [click here for more] |
Fat Dragon Games |
$7.95
|
City of Tarok is a 3D printable medieval and fantasy village set with buildings that were great at their height, but after a huge war, they are just crumbling remains of the gorgeous buildings they once were. The area is still populated, but the inhabitants have fallen on hard times. As people come back, the once-abandoned buildings are getting new life, the mill, blacksmith and mine are working again... [click here for more] |
Black Scrolls Games |
$12.00
|