| Title ▲ |
Publisher |
Price |
Milestone Heroes is dedicated to bringing your visions to life with high-quality, support-free, modular gaming terrain. I take great pleasure in creating fantasy terrain that is highly reusable, printer-friendly, and strikes a practical balance between realism and playability. All models print without additional support or are fully supportless.
This set includes: • 88 modular Dragonbite™ compatible... [click here for more] |
Milestone Heroes |
$19.99
|
Milestone Heroes is dedicated to bringing your visions to life with high-quality, support-free, modular gaming terrain. I take great pleasure in creating fantasy terrain that is highly reusable, printer-friendly, and strikes a practical balance between realism and playability. All models print without additional support or are fully supportless.
This set includes: • 70 modular Dragonbite™ compatible... [click here for more] |
Milestone Heroes |
$19.99
|
A new small island for your 1/600 naval wargames like Manowar, Oak & Iron, Age of Sail, and others.
One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.
nonPareil institute is committed to building better futures... [click here for more] |
nonPareil |
FREE
|
This generic Small Bunker is a 15mm (1:100 to 1:120 scale) STL model, suitable for WW1, WW2, Modern, and Science Fiction games.
This model comes in two parts. Print the bottom part with the floor on the print bed and the roof upside down.
This is for personal use only.
It is best printed with a 0.4mm nozzle at 10% to 20% infill without supports. ... [click here for more] |
Gallant Knight Enterprises |
Pay What You Want
|
This is a 12 unique piece stl set for creating Retro Scifi scatter terrain that fits great with the Eternal Palace tile set that is also offered. Computer consoles, a column, tables, equipment etc included in 28mm scale.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is a 10 unique piece stl set for creating Retro Scifi scatter terrain that fits great with the Eternal Palace tile set that is also offered. Thrones, dais, doors etc. Largest piece is 5.453 inches
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 12 unique piece stl set for creating a 28mm scaled, Soviet inspired Multiple Rocket Launch System Truck as well as a Command truck, Turret truck and Cargo truck for tabletop gaming. The largest piece's footprint consisting of 58.37 mm x 108.74mm x 28.88 mm. All pieces are socketed for easy construction and jointed for articulation.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
4-Rad Flamwagen Sci-fi Gaming Vehicle 3D Printable .STL files
28mm heroic scale
All the parts of the flamwagen are interchangeable with the 4 rad srurmwagen, so for example you could build a sturmwagen with the wheels from a flamwagon, or a flamwagon with a gun from the sturmwagen.
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many... [click here for more] |
Redstarkits |
$3.00
|
4-Rad Sturmwagen Sci-fi Gaming Vehicle 3D Printable .STL files
Scaled for 28mm heroic wargames
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many others. ... [click here for more] |
Redstarkits |
$2.50
|
This is a set of alternative weapons for the 4Rad sturmwagen.
Most of these can be printed without rafts or supports. The exception is the energy weapon that needs supports.
The 28mm 4-rad sturmwagen is available on Drviethrurpg.com and Wargamesvault.com
Scaled for heroic 28mm wargames
There are a 6 new options + a blank without a gun so you can fit your own ... [click here for more] |
Redstarkits |
$1.50
|
This is an 6 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Assault Pod for tabletop gaming. 9 total pieces needed to print the model, with the largest piece's footprint consisting of 60.48 mm x 66.95 mm x 53.25 mm. All pieces are socketed for easy construction and turrets rotate.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 3 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Command Wing for tabletop gaming. 3 total pieces needed to print the model, with the largest piece's footprint consisting of 45.46 mm x 56.24 mm x 24.13 mm. A peg piece is included for docking to the Baphomet.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 8 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Good Guys Chopper for tabletop gaming. 8 total pieces needed to print the model, with the largest piece's footprint consisting of 29 mm x 106 mm x 35 mm. All pieces are socketed for easy construction and turrets rotate. ... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 10 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Good Guys Main Battle Tank for tabletop gaming. 11 total pieces needed to print the model, with the largest piece's footprint consisting of 59.89 mm x 146.77 mm x 28 mm. All pieces are socketed for easy construction and turrets rotate.
stl file naming convention- files ending in _2n means 2 pieces need printed to... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is an 7 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Assault Barge for tabletop gaming. 11 total pieces needed to print the model, with the largest piece's footprint consisting of 129.52 mm x 149.96mm x 50.58mm. All pieces are socketed for easy construction and turrets rotate. ... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 10 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Baphomet AFV for tabletop gaming. 15 total pieces needed to print the model, with the largest piece's footprint consisting of 44.75 mm x 79.15 mm x 40.64 mm. All pieces are socketed for easy construction and turrets rotate. ... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is an 8 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Boar for tabletop gaming. 15 total pieces needed to print the model, with the largest piece's footprint consisting of 93.35 mm x 57.96 mm x 35.50 mm. All pieces are socketed for easy construction and turrets rotate.
The naming of the files dictates if multiple prints are needed to complete the model. Example, Boar_Missile4n.stl... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is an 5 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Recon Sled for tabletop gaming. 6 total pieces needed to print the model, with the largest piece's footprint consisting of 32.89 mm x 82.24 mm x 39.25 mm. All pieces are socketed for easy construction and turrets rotate.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 8 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Terror APC for tabletop gaming. 17 total pieces needed to print the model, with the largest piece's footprint consisting of
56.02 mm x 60.12 mm x 40.98 mm. All pieces are socketed for easy construction and turrets rotate.
stl file naming convention- files ending in _2n means 2 pieces need printed to complete... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is an 11 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Terror Main Battle Tank for tabletop gaming. 14 total pieces needed to print the model, with the largest piece's footprint consisting of 50.60 mm x 95.03 mm x 46.8 mm. All pieces are socketed for easy construction and turrets rotate.
stl file naming convention- files ending in _4n means 4 pieces need printed to complete... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is an 7 unique piece stl set for creating a 28mm scaled 1980s Pulp inspired Urban Terror AFV for tabletop gaming. 13 total pieces needed to print the model, with the largest piece's footprint consisting of
115.43 mm x 83 mm x 24.51 mm. All pieces are socketed for easy construction and turrets rotate.
stl file naming convention- files ending in _4n means 4 pieces need printed to complete... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is a 3 unique piece stl set for creating a 28mm scaled Beam Blaster Cannon for tabletop gaming. 3 total pieces needed to print the model, with the largest piece's footprint consisting of 45.78 mm x 33.17 mm x 8.78 mm.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is a 12 unique piece stl set for creating 3 different 28mm scaled Destroyer Tanks for tabletop gaming. All pieces are socketed for easy assembly with universal tracks for all 3 models. The largest piece's footprint consisting of 67.61mm x 132.50 mm x 77.01 mm.
There are two small discs on the Hord tanks front hull teeth that were placed for ease of printing, simply clip those off after... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This is a 5 unique piece stl set for creating a 28mm scaled KAT AFV for tabletop gaming. 5 total pieces needed to print the model, with the largest piece's footprint consisting of 60.58 mm x 122.96 mm x 31.87 mm.
... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is an 8 unique piece stl set for creating a 28mm scaled Lebed inspired Soviet Hovercraft for tabletop gaming. 10 total pieces needed to print the model, with the largest piece's footprint consisting of 107.09mm x 148.25mm x 81.20mm. All pieces are socketed fro easy construction and turret rotates and allows for a model to be placed in it.
Examples of a PLA printed copy that has been painted:... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
This is a 5 unique piece stl set for creating a Stormhammer jet. The largest piece's footprint consisting of 56.11 mm x 100.01 mm x 27.87 mm.
... [click here for more] |
Doctor Merkury's Lab |
$20.00
|
This generic Small Bunker is a 28mm (1:58 scale) STL model, suitable for WW1, WW2, Modern, and Science Fiction games.
This model comes in two parts. Print the bottom part with the floor on the print bed and the roof upside down.
This is for personal use only.
It is best printed with a 0.4mm nozzle at 10% to 20% infill without supports.
This model can be scaled to different sizes.
25mm (1:64)... [click here for more] |
Gallant Knight Enterprises |
Pay What You Want
|
RUSTIC TAVERN FURNITURE:
“Hello friends! Make your selves at home… I’ll have a wench over with some starter ale and hot rolls in just a moment...” The bartender calls out to the party and seems friendly enough. The place appears to be well stocked and laid out with wooden furniture that is quite durable but rustic in nature. The thief eyes the bench for possible splinters before sitting... [click here for more] |
HAZARD Studio |
$1.99
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
Pay What You Want
|
4-Rad Flamwagen Sci-fi Gaming Vehicle 3D Printable .STL files
1/35 scale model of a fictional assault. The files can be resized using a slicer program to any scale that suits you
All the parts of the flamwagen are interchangeable with the 4 rad srurmwagen, so for example you could build a sturmwagen with the wheels from a flamwagon, or a flamwagon with a gun from the sturmwagen.
This vehicle... [click here for more] |
Redstarkits |
Pay What You Want
|
4-Rad Sturmwagen Sci-fi Gaming Vehicle 3D Printable .STL files
1/35 scale model of a fictional assault. The files can be resized using a slicer program to any scale that suits you
I recomend 80% size print for 28mm games
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many others. ... [click here for more] |
Redstarkits |
Pay What You Want
|
This generic Small Bunker is a 6mm / 1:285 scale STL model, suitable for WW1, WW2, Modern, and Science Fiction games.
This is for personal use only.
It is best printed with a 0.4mm nozzle at 10% to 20% infill without supports. ... [click here for more] |
Gallant Knight Enterprises |
Pay What You Want
|
The Abandoned Village of Generica will fill your tabletop with enough pieces to create an abandoned village for your advetnrurers to explore with plenty of hidden spaces for monsters to stalk through and set traps for your unwary travellers.
This includes pieces for a large cottage, 4 smaller cottages (and some ruined counterparts of these small ones) A chapel and its ruined version. A stable and... [click here for more] |
Devious Games |
$60.00 $50.00
|
A model of a Dahlgren 9in gun, used in the ACW in verious roles as ship's armamant, fortification or siege wapon. ... [click here for more] |
Xerbath |
$1.80
|
Turu is the Shellfather of all turtle-kind and is a generally a friendly deity to those who respect his many children. Turu is not the largest or strongest god, but he is quite possibly the oldest. The children of Turu who reach the size of their father are few, generally dying of heart break. The loss of a favorite dwelling, water, or food source can be deadly to those who grow attached to the physical... [click here for more] |
Aether Studios |
Pay What You Want
|
Create elaborate hedge mazes with these 3D-printable STL files. This Hedge Mazes set includes walls, posts, corners, arches, and a gate paired with both a natural ground style and a Herringbone style brick floor that you might find in the Hedge Maze behind a Lord's manor.
These tiles are compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$1.00
|
Konga: A Dark Place contains two 3D-printable STL models of the skull rock shown on the cover, one on Countryside Dirt terrain on a DragonbiteTM base, and a separate scatter terrain variant that doesn't include a base of its own.
See it in Sketchfab - https://sketchfab.com/models/f23e6e926e374995ba009db3331cc777
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$2.00
|
This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways.
The center of the bridge prints in two parts, and you should glue the two parts together.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% for all models recommended,... [click here for more] |
Aether Studios |
$17.00
|
This set of 3D-printable STL terrain is a companion to Peaceful Gardens, the May 2018 DungeonPrint Community Choice set. It includes four large fountains:
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side... [click here for more] |
Aether Studios |
$5.00
|
This set of 3D-printable STL models includes 2 models that combine to make a huge scatter Crocodile Skull repurposed into a dwelling. The two sections print supportless and connect with dragonbite clips. The miniature is shown for scale and is not included, but you can find him here!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill:... [click here for more] |
Aether Studios |
$8.00
|
The anti-aircraft gun on its turret reliably captures all approaching targets in order to fight them automatically. If necessary, its twin guns can also be used effectively against ground units.
The pack contains stl files for:
• a rotatable air defense turret
Turrets can be exchanged with all other MK I turrets from NEOPHIR.
Models are designed for 28mm miniatures, but might be re-scaled... [click here for more] |
NEOPHIR |
$2.64
|
Aerial resupply and troop deployment was a vital strategy to the war-effort of both the Allied and Axis forces during world war two.
Now you can bring this element to your own tabletop games and diaramas' with our four piece aerial resupply set provided to you under a creative commons personal-use license (mod, education purpose, machinma and fan art only).
Included with your purchase are... [click here for more] |
Game Tree 3D Print Scenics |
$4.54
|
This is a set of alternative weapons for the 4Rad sturmwagen.
Most of these can be printed without rafts or supports. The exception is the energy weapon that needs supports.
The 4-rad sturmwagen is available on Drviethrurpg.com and Wargamesvault.com
The originals are in 1/35scale but can be scaled to what ever scale you like with a slicer before printing.
For 28mm I find it best to... [click here for more] |
Redstarkits |
$1.50
|
Ammunition Trays for Westerner's Dash for Six-gun, Derringer, Buffalo Rifle, Lever-Action Rifle or Shotgun. OpenLOCK trays for Six-gun, Derringer, Buffalo Rifle, or Lever-Action Rifle. Shells for Six-gun, Derringer, Buffalo Rifle, Shot gun, and Lever-Action Rifle included.
This product is for a set of digital STLs file for use with your 3D printer.
Included with the STLs is a readme detailing printer... [click here for more] |
Blessed Machine |
$3.00
|
Aztlan 2 Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 awesome models in it has now been expanded. Aztlan 2: Reforged is a 111 model mega set with room and corridor options in abundance. The Cat Den wall was a big favorite... [click here for more] |
Aether Studios |
$4.00
|
Aztlan 3: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 35 expansion models in it has now exploded in size. Aztlan 3: Reforged is a 107 model mega set with room and corridor options in abundance. This set allows... [click here for more] |
Aether Studios |
$2.00
|
Aztlan 4: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 31 expansion models in it has now exploded in size. Aztlan 4: Reforged is a 103 model mega set with a vast array of new models. This set allows you to build... [click here for more] |
Aether Studios |
$4.00
|
Aztlan 5: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 temple models has increased in size and quality. Aztlan 5: Reforged is now a 59 model set updated with requests. With these models you can build out huge... [click here for more] |
Aether Studios |
$2.00
|
A range of ships that saw action in the Balkan Wars of 1912-13 ... [click here for more] |
Twylite Games |
$7.46
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
- camp base
- tower
- 3 different tents
- many defense parts
- barrels and chests
- sleeping bags
and many more...
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example... [click here for more] |
ESLO |
$16.95
|
Log In 
