Close
Close
Narrow Results
$ to $
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!















GenrePublisher
Miscellaneous   Remove Search Term
Aether Studios   Remove Search Term
Advanced Search

pixel_trans.gif
 
 Hottest Miscellaneous from Aether Studios
pixel_trans.gif
pixel_trans.gif
 
 Newest Titles in This Section
pixel_trans.gif
Products found in this section... Sort by: 
 Title    Publisher    Price  
AEAACH02 - WoA: Tower of Zol'Tigan

AEAACH02 - WoA: Tower of Zol'Tigan


This set of 3D-printable STL terrain was built to expand the the World of Aach'yn.  In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his tower... his tower...  Let's just say you would only go there if you were very, VERY desperate to save someone... someone so important to you, that your own life was hardly a consideration.  Because you'd surely be leaving it behind....   [click here for more]
Aether Studios  $10.00

Add to DriveThruRPG.com Order  
AEAADV06 - The Bonepit of Zol'Tigan

AEAADV06 - The Bonepit of Zol'Tigan


This set of 3D-printable STL terrain was built to expand the the World of Aach'yn.  In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his cultists live only to serve him.  Therefore, they must be able to gather and hold the "raw material" for these terrible ceremonies.  The bone pits are where such unfortunates may be found. This set includes both a scatter version...   [click here for more]
Aether Studios  $4.00

Add to DriveThruRPG.com Order  
AECAST01 - Skull Taker

AECAST01 - Skull Taker


This miniature, Skull Taker, was sculpted by Nasos Maloudis and remixed by Will Walker. It is a reward for the backers of Explore Dungeons #1, a Kickstarter from our long time friend, patron, and backer Chris G. Williams. Skull Taker is featured in one of the adventures in this spectacular eZine and we are very pleased to bring him to life. We later released this as a patreon reward to our amazing...   [click here for more]
Aether Studios  $1.00

Add to DriveThruRPG.com Order  
AECLIP01 - Aztlan Clip-On Dungeon

AECLIP01 - Aztlan Clip-On Dungeon


Aztlan is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. Aztlan Clip-On was one of our most often requests. We wanted to make sure the first set had everything you needed to get started, but to get the full utility of this set, we recommend you pick up free the Aztlan...   [click here for more]
Aether Studios  $15.00

Add to DriveThruRPG.com Order  
AEDWRF0 - Dwarven Kingdom Starter

AEDWRF0 - Dwarven Kingdom Starter


Included in this set of 3d printable terrain you will find 19 .STL models for creating dwarven dungeons. This tile set features walls, doors, corners, and corner pillars needed to make rooms of any size that connect to each other with Dragonbite clips. This set has 3 styles of terrain: Resized Legacy tiles match our original sculpts, but as the name suggests they are all slightly resized to match...   [click here for more]
Aether Studios  Pay What You Want

Add to DriveThruRPG.com Order  
AEDWRF03 - Kingdom Old Quarter

AEDWRF03 - Kingdom Old Quarter


This set of 80 3D-printable STL files includes numerous floors, walls, doors, and corridors, many with unique engraved detail.  It also features a centerpiece tile with a statue of the King of the Dwarves!  These pieces build on the Dwarven Holds Core set and individual Dwarven Hold sets to expand your dungeons and mines with new variety and amazing detail. Recommended Print Settings: Layer...   [click here for more]
Aether Studios  $15.00

Add to DriveThruRPG.com Order  
AEDWRF11 - Clan Nogg's Great Table

AEDWRF11 - Clan Nogg's Great Table


This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 4 3d printable .STL files for your tabletop games. TERRAIN Recommended Print Settings:...   [click here for more]
Aether Studios  $5.00

Add to DriveThruRPG.com Order  
AEDWRF12 - Clan Secret Passages

AEDWRF12 - Clan Secret Passages


This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 25 3d printable .stl files for your tabletop games. Recommended Print Settings: Layer Size:...   [click here for more]
Aether Studios  $6.00

Add to DriveThruRPG.com Order  
AEHDGE01 - Hedge Maze Core Set

AEHDGE01 - Hedge Maze Core Set


Create elaborate hedge mazes with these 3D-printable STL files.  This Hedge Mazes set includes walls, posts, corners, arches, and a gate paired with both a natural ground style and a Herringbone style brick floor that you might find in the Hedge Maze behind a Lord's manor. These tiles are compatible with all DragonbiteTM terrain. Recommended Print Settings: Layer Size: 0.15mm,...   [click here for more]
Aether Studios  $1.00

Add to DriveThruRPG.com Order  
AEKNGA01 - Konga Rising

AEKNGA01 - Konga Rising


This set of printable terrain STLs is the start of a new style of jungle walls and buildings, with a very special dungeon entrance piece! You can see models in this set here. It was the July 2018 DungeonPrint Community Choice selection and has been updated multiple times since release. Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill:...   [click here for more]
Aether Studios  $6.00

Add to DriveThruRPG.com Order  
AEPCEF01 - Peaceful Gardens

AEPCEF01 - Peaceful Gardens


This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways. The center of the bridge prints in two parts, and you should glue the two parts together. RECOMMENDED PRINT SETTINGS Layer Size: 0.15mm recommended, 0.1mm for smoother features Infill: 10% for all models recommended,...   [click here for more]
Aether Studios  $17.00

Add to DriveThruRPG.com Order  
AESS310 - Space Ships 3: Core Set

AESS310 - Space Ships 3: Core Set


Space Ships 3 is the next in Will Walker's line of beloved space terrain. 50+ STL 3d printable files are included in this Core Set, including everything you need to make a magnificent space ship or station. This is one of our patron supported sets. Over 500 additional models available to our patrons. You can find a link to the Patreon included in the Readme. Alien Terrain Sets Alien...   [click here for more]
Aether Studios  Pay What You Want

Add to DriveThruRPG.com Order  
AESWMP05 - Croc Hut

AESWMP05 - Croc Hut


This set of 3D-printable STL models includes 2 models that combine to make a huge scatter Crocodile Skull repurposed into a dwelling. The two sections print supportless and connect with dragonbite clips. The miniature is shown for scale and is not included, but you can find him here! Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill:...   [click here for more]
Aether Studios  $8.00

Add to DriveThruRPG.com Order  
Aztlan 1: Reforged

Aztlan 1: Reforged


Aztlan 1 Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons.  This set includes the starter STL models you’ll need for Aztlan rooms, multiple levels, and a grand temple entrance.   It is compatible with all other DragonlockTM models....   [click here for more]
Aether Studios  $10.00

Add to DriveThruRPG.com Order  
Aztlan 2: Reforged

Aztlan 2: Reforged


Aztlan 2 Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 awesome models in it has now been expanded. Aztlan 2: Reforged is a 111 model mega set with room and corridor options in abundance.   The Cat Den wall was a big favorite...   [click here for more]
Aether Studios  $4.00

Add to DriveThruRPG.com Order  
Aztlan 3: Reforged

Aztlan 3: Reforged


Aztlan 3: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 35 expansion models in it has now exploded in size. Aztlan 3: Reforged is a 107 model mega set with room and corridor options in abundance. This set allows...   [click here for more]
Aether Studios  $2.00

Add to DriveThruRPG.com Order  
Aztlan 4: Reforged

Aztlan 4: Reforged


Aztlan 4: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 31 expansion models in it has now exploded in size. Aztlan 4: Reforged is a 103 model mega set with a vast array of new models. This set allows you to build...   [click here for more]
Aether Studios  $4.00

Add to DriveThruRPG.com Order  
Aztlan 5: Reforged

Aztlan 5: Reforged


Aztlan 5: Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. What was a set with 29 temple models has increased in size and quality. Aztlan 5: Reforged is now a 59 model set updated with requests. With these models you can build out huge...   [click here for more]
Aether Studios  $2.00

Add to DriveThruRPG.com Order  
Aztlan 6: Swamped

Aztlan 6: Swamped


Aztlan 6: Swamped is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we decided to kickstarter it with requests by our many fans and patrons. We've packed this set full of terrain - over 120 models of .STL printable files. To get the full utility of this set, we recommend you have the Aztlan 1 and Aztlan 4 or Aztlan Starter...   [click here for more]
Aether Studios  $10.00

Add to DriveThruRPG.com Order  
Aztlan 7: Traps

Aztlan 7: Traps


Aztlan 7: Traps is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we decided to kickstart up it with requests by our many fans and patrons. We've packed this set full of terrain - over 330 models of .STL printable files. To get the full utility of this set, we recommend you have the Aztlan 1 and Aztlan 4 or Aztlan Starter...   [click here for more]
Aether Studios  $15.00

Add to DriveThruRPG.com Order  
Aztlan Awakens Miniatures

Aztlan Awakens Miniatures


Aztlan Awakens Miniatures features all of the core and a few of the stretch goal rewards from our 2nd Kickstarter. This set features 3-4 poses each of the "Brave Souls Three" our band of heroes, plus many azite snakefolk and other threats they encounter during the adventure. There are 32 miniatures in .stl format for 3d printing. Also included are 15 miniatures bases for your own personal needs. All...   [click here for more]
Aether Studios  $16.00

Add to DriveThruRPG.com Order  
Aztlan Sacrificial Ziggurat

Aztlan Sacrificial Ziggurat


Aztlan was our first original set that got developed into a full series. It was Will's baby to start, but almost all the Aether Staff have since contributed. It is also our largest tile set series, with well over 1000 models. This latest expansion, Sacrificial Ziggurat, started off as a small 4 piece set from Nasos for making simple, small ziggurats. It has since expanded into a massive 20+ tile-set...   [click here for more]
Aether Studios  $5.00

Add to DriveThruRPG.com Order  
Aztlan Snake Miniatures

Aztlan Snake Miniatures


Aztlan Snake Miniatures is a 3D-printable set of miniatures by Aether Studios and sculptor Nasos Maloudis. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. Part of that expansion included this line of miniatures.  In our World of Aach'yn, Aztlan is the home of the Azite Snakefolk and is filled with primal terrors of...   [click here for more]
Aether Studios  $7.00

Add to DriveThruRPG.com Order  
Aztlan Starter

Aztlan Starter


Aztlan Starter is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and this introductory set will give you everything you need to get started making dungeons. This set includes a unique floor, door, and stairs models not found in other sets.    It is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the...   [click here for more]
Aether Studios  Pay What You Want

Add to DriveThruRPG.com Order  
Christmas in 3D

Christmas in 3D


This set of 3D-printable STL scatter terrain was sculpted by Jacob Armour in celebration of the holidays. Everything you need to give your players a very Merry Christmas! Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side...   [click here for more]
Aether Studios  $1.00

Add to DriveThruRPG.com Order  
Countryside

Countryside


Includes 5 styles each of Asteroid, Rough Dirt, Uneven Ground, and Snowy Drift terrain. Each style is available with and without grid marks. There are a total of 40 STL files that are all DragonbiteTM compatible. A special note of attribution: These tiles use the very wonderful rocks released by Terrain4Print under CC-AO. Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm...   [click here for more]
Aether Studios  $5.00

Add to DriveThruRPG.com Order  
Dragons of Aach'yn: Raxx

Dragons of Aach'yn: Raxx


Raxx is the Dragon that rules over the Aztlan Plataeu. Raxx is among the most unusual dragons on Aach’yn. He keeps a village of humanoids as protected pets. He allows other Dragons to transit his territory. And his lineage is the most well known of any Dragon. His parent, Allatraxxus, is the massive ancient black gold wyrm that guards the Tomb of Juve at the Hall of the Setting Sun. Sculpted by...   [click here for more]
Aether Studios  $9.00

Add to DriveThruRPG.com Order  
Dragons of Aach'yn: Xy Gamus

Dragons of Aach'yn: Xy Gamus


Included in this set of  3D-printable STL models from Nasos Maloudis is a massive Dragon, Xy Gamus the Ash Wyrm of the High Zafiri Wilds. The elders of High Zafiri learned long ago to pay whatever reasonable tribute was asked of the Great Dragon. Xy Gamus has several nests in the wilds from cliffside locations to a desert oasis. This model is large with 250mm x 216mm x 170mm dimensions. It is easily...   [click here for more]
Aether Studios  $8.00

Add to DriveThruRPG.com Order  
Dwarven Holds: Big Hans

Dwarven Holds: Big Hans


Included in this release is the Dwarven Crusher "Big HANS" This mean machine has been engineered as a giant crushing vehicle perfect for arena deathmatches. The model is available as a single print or as two halves that clip together. This model was a reward for patrons of Aether Studios in March 2020. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill:...   [click here for more]
Aether Studios  $1.00

Add to DriveThruRPG.com Order  
Electro Rail Trains: Idasiel Station

Electro Rail Trains: Idasiel Station


Idasiel Station is small station and platform for the Electro-Rail Trains. It is perfect for stops out in the country or at a small town. Inlcudes a prebuilt 4x4 building (roof extends out a bit) and 2x2 peices to make a platform of any length. Other Eletro-Rail sets: Fairhaven Line Onasan Line Vrai Foundry Line RECOMMENDED PRINT SETTINGS  ● Layer Size: 0.15mm recommended, .1 for smoother...   [click here for more]
Aether Studios  $4.00

Add to DriveThruRPG.com Order  
Fantasy Villages: Dinoblood Derricks

Fantasy Villages: Dinoblood Derricks


Fantasy Villages is the launch set series for the Aether Studios Patreon. We wanted a diverse set of buildings for fantastic locations where we would want OUR players to end up. This release contains over 40 3d printable STL models for making tarpits, derricks, and other dwarven excavation goodies.  The Dinoblood Derricks were one of the first ideas we threw around on the patreon. I really wanted...   [click here for more]
Aether Studios  $10.00

Add to DriveThruRPG.com Order  
Fantasy Villages: Gnomish Airships

Fantasy Villages: Gnomish Airships


Gnomish Airships contains three 3D-printable STL airships for the serious Gnomish tinkerer.  Each airship has accessory mounts, and a number of different accessories are included so you can customize each ship (cannons, turbines, etc. -- the cover rendering shows several assembled options).  Never let your inventors be ground-bound again! Note: the Gnomish Workshop set is recommended to complement...   [click here for more]
Aether Studios  $7.19

Add to DriveThruRPG.com Order  
Fantasy Villages: Mothsilk Glade

Fantasy Villages: Mothsilk Glade


Fantasy Villages: Mothsilk Glade is a 3D-printable natural terrain tileset by Aether Studios. Fantasy Villages was the launch series for our patrons. We routinely expand it with new sets for our beloved patrons. This latest expansion includes 100 models of intricately detailed terrain and includes everything you need to build a woodland hamlet.    This set of terrain is compatible with all...   [click here for more]
Aether Studios  $25.00

Add to DriveThruRPG.com Order  
Fantasy Villages: Ponyhorn Stables

Fantasy Villages: Ponyhorn Stables


Fantasy Villages is the launch set series for the Aether Studios Patreon. We wanted a diverse set of buildings for fantastic locations where we would want OUR players to end up. Ponyhorn Stables is the latest in this line. These small unicorn ponies are perfect for a gnomish knight or halfling hero's noble steed. The farm fence tiles match models from our Gnomish Farms set, but everything you need...   [click here for more]
Aether Studios  $3.00

Add to DriveThruRPG.com Order  
Fantasy Villages: Snail Hut

Fantasy Villages: Snail Hut


Fantasy Villages is the launch set series for the Aether Studios Patreon. We wanted a diverse set of buildings for fantastic locations where we would want OUR players to end up. Jeromy K.Smith worked up this newest release which features a giant snail shell dwelling.  This and so many other sets were made with the amazing support of the Aether Studios Patrons. Check us out on Patreon to get access...   [click here for more]
Aether Studios  $3.00

Add to DriveThruRPG.com Order  
Junk Planet

Junk Planet


Junk Planet by Aether Studios' Colin Christenson is the new line from our design team. Build the junkyard of your dreams or a salvage pit full of encounters. Included in this set you'll find 50 .stl files for 3d printing up a wide variety of junk options! Other Sci-Fi Sets Space Ships 3 Tycho Streets & Bazaar Tycho Simple Scifi Tycho Uptown Tycho Industrial Scaffolds Space...   [click here for more]
Aether Studios  $13.00

Add to DriveThruRPG.com Order  
Junk Planet 2

Junk Planet 2


Junk Planet 2 by Aether Studios feature more of the delightful planet of trash can refuse built by Colin Christenson. Nasos Maloudis and Will Walker took to the remixing with new elements and transitions to the Junk Planet 1 set. build the junkyard of your dreams or a salvage pit full of encounters. Included in this set you'll find 25 .stl files for 3d printing up a wide variety of junk options! Other...   [click here for more]
Aether Studios  $5.00

Add to DriveThruRPG.com Order  
KS7ROQ03 - Roqom Core Scatter

KS7ROQ03 - Roqom Core Scatter


60+ models for FDM printing for use in hellish encounters. All the models are scatter terrain from our 7th Kickstarter: Roqom – Lava Dungeon Hellplane. All miniatures are designed for FDM printing.  Please, think of the mice powering the image servers before you download any of the pictures on this page or clear your cache.  ...   [click here for more]
Aether Studios  $15.00

Add to DriveThruRPG.com Order  
KS7ROQ04 - Roqom Minis

KS7ROQ04 - Roqom Minis


40+ Miniatures, for resin printing, for use in hellish encounters. All the miniatures from our 7th Kickstarter: Roqom – Lava Dungeon Hellplane. All miniatures are designed for resin printing.  Also all the miniatures are pre-supported using Lychee, with a save file and unsupported files included. Please, think of the mice powering the image servers before you download any of the pictures on this...   [click here for more]
Aether Studios  $21.00

Add to DriveThruRPG.com Order  
Pharaoh 6: Phreebies

Pharaoh 6: Phreebies


This set of 3D-printable terrain and miniatures, Pharaoh 6, was made by all of the Aether Studios artists together. Everyone contributed to this set, with Tia making the first textures, Jake making the animals, Colin with the Ram, Jeromy with scatter, Will and Nasos with the rest. Pharaoh has long been a collaborative experience and this set is the paragon of our progress so far. We hope you enjoy...   [click here for more]
Aether Studios  Pay What You Want

Add to DriveThruRPG.com Order  
Seraphim -X-

Seraphim -X-


This set of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening. DriveThur limits the number of pictures we can post. If you...   [click here for more]
Aether Studios  $7.00

Add to DriveThruRPG.com Order  
Seraphim Solo: The Doomball of Doom

Seraphim Solo: The Doomball of Doom


Included in this set of 3d printable terrain you will find a classic trap to add to your Seraphim Dungeons. The Doomball of Doom will let you crush those who dare enter House of Heroticus without his permission. Recommended Print Settings: Layer Size: 0.15mm, or 0.10mm for smoother features Infill: 10% recommended Top/Bottom Layers: 6 (or 0.9mm...   [click here for more]
Aether Studios  $3.00

Add to DriveThruRPG.com Order  
Seraphim: Minis

Seraphim: Minis


This newest release of Seraphim includes a few miniatures we really wanted to get out. Pope Qarl and his Elemental Gargoyle Band are the warriors of Juvé, Goddess of Regrowth. We used these Gargoyles in the Seraphim Shortwall set and wanted to fill the request for miniatures, we hope you enjoy these supportless printing miniatures. We've updated this set with new miniatures from Nasos Maloudis. ...   [click here for more]
Aether Studios  $5.00

Add to DriveThruRPG.com Order  
Sky Islands: Akara's Guest House

Sky Islands: Akara's Guest House


Included in this set of terrain you will find a large 6×6 Sky Islands House. Akara built this for her friends who often need a place to layover or a place to put up their feet and sit for a spell. It prints without supports and features tons of internal playing area. Dragonbite connections all for expansion into a massive cloud docks setting. We hope you enjoy this set, it was made by Colin Christenson...   [click here for more]
Aether Studios  Pay What You Want

Add to DriveThruRPG.com Order  
Swamp of Sorrows - Azite Warriors

Swamp of Sorrows - Azite Warriors


From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes 10 Azite Warriors miniatures from our first kickstarter. The set includes all of the miniatures models shown below and more. All miniatures print without supports. Additional information and resources can be found in the ReadMe.  RECOMMENDED PRINT SETTINGSLayer Size: 0.1mm...   [click here for more]
Aether Studios  $15.00

Add to DriveThruRPG.com Order  
Swamp of Sorrows - Black Dragon

Swamp of Sorrows - Black Dragon


From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes the colossal Black Dragon miniature from our first Kickstarter. This model prints in two pieces. It does not include the terrain models, which you can find in the Scatter Reeds and Rogue Brackmurk sets below. All miniatures print without supports. Additional information and resources can be found...   [click here for more]
Aether Studios  $7.00

Add to DriveThruRPG.com Order  
Swamp of Sorrows - Core Miniatures

Swamp of Sorrows - Core Miniatures


From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set, Core Miniatures, includes the models offered in our Core Miniatures package, excluding stretch goals. The set includes all of the miniatures models shown below, it does not include the terrain shown with the Hydra. Each of the three necks can be fitted for either one or two heads, as needed. All miniatures...   [click here for more]
Aether Studios  $48.00

Add to DriveThruRPG.com Order  
Swamp of Sorrows - Hags & Prisoners

Swamp of Sorrows - Hags & Prisoners


From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes 8 Hag and Prisoner miniatures from our first kickstarter. The set includes all of the miniatures models shown below and more. All miniatures print without supports. Additional information and resources can be found in the ReadMe.  RECOMMENDED PRINT SETTINGSLayer Size: 0.1mm...   [click here for more]
Aether Studios  $11.00

Add to DriveThruRPG.com Order  
Swamp of Sorrows - Lily Wetlands

Swamp of Sorrows - Lily Wetlands


From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set, Lily Wetlands, was built specifically to blend with our existing published Dockyards titles. It contains 39 2x2 and 4x4 tiles on top of Dragonbite bases. Additional printing advice is available in the included ReadMe.   RECOMMENDED PRINT SETTINGS Layer Size:...   [click here for more]
Aether Studios  $15.00

Add to DriveThruRPG.com Order  
Swamp of Sorrows - Stepping Stones

Swamp of Sorrows - Stepping Stones


Included in this set of 3d printable scatter terrain you will find 44 . STL 3d printable files.  These stepping stones add new expansion opportunities to your swamps. This set has both scatter and tile options.  Both brackish tiles and dockyards water tiles are available.   TERRAIN Recommended Print Settings: Layer Size: 0.15mm recommended, 0.1mm for smoother features Infill:...   [click here for more]
Aether Studios  $5.00

Add to DriveThruRPG.com Order  
Displaying 1 to 50 (of 52 items) Result Pages:  1  2  [Next >>] 
Select Page Number

  b_23392_20240312040351.jpg