3D Print It: Organ Of Doom

3D PRINT IT SERIES: ORGAN OF DOOM

Strange organ music echoes down the hallway, making you strangely dizzy and unable to focus. As you stumble your way into the main chamber you witness the presence of the villainous Master Tempo up on a grand stage. This arch criminal is playing away at a strange looking musical organ. Surrounding the organ are large amplifiers. The blast of music coming from these amps is unbearable... you suddenly collapse to the floor.

"Greetings heroic fools!", Master Tempo shouts as he continues to play, "I hope you enjoy the music as I wrote this little number just for you... it shall be your funeral march!!!"

The organ of doom and the amplifiers are perfect additions to any super hero or villain base. This strange instrument could also be easily added to a variety of other gaming genres, from post apocalypse to fantasy/sci-fi fusion to space opera style settings. This model is printed in one single piece. The default size settings are perfect for miniatures on the 28mm to 30mm scale. Naturally this item can be resized in your slicer program to meet your needs if your miniatures are on a different scale.

Here’s the default dimensions for the files.
Organ of Doom: 33mmx16.21mmx24mm
Organ Amp: 30mmx22mmx50mm

Many folks often ask the designer what settings are recommended for printing various files. Depending on your printer, your slicer program, your choice of materials, etc. these recommendations can change. The designer tests these files on a Qidi X-Smart (using the native Qidi slicer), an Ender 3 printer (using Cura), and an Ender 5 (using Cura for the slicer). Of all of these the most common option for most hobbyists would be the Ender 3 with settings in Cura. Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer) or Qidi X-Smart, Hatchbox, Duramic3d, or Stronghero brand 1.75 PLA filament. Please note that these settings print very slow, but should provide you a nice finish with details. You can always speed the settings up if you prefer speed over fine detail.

Layer Height: 0.06mm
Wall Thickness: .8mm
Top Thickness: .6mm (10 layers)
Bottom Thickness: .6mm (10 layers)
Horizontal Expansion: 0mm
Infill Density: 15mm (Grid Pattern)
Printing Temperature: 200 C (for PLA)
Build Plate Temperature: 60 C
Enable Retraction: Yes
Print Speed: 40mm
Supports: Yes. Its recommended that you use the experimental tree supports for these files.